MAGNETIC TOOLS, INC.


Magnetic Tools Descriptions

Magnetic Handles Part No. Tool Weight. Max. Lift Penetration and Best Uses
Model 20 Gun Chuck 20106 2 Not for lifting Penetration- 1/8"
* Hold flat parts for sanding, grinding, polishing, buffing, tack welding or positioning for layout.
* Retrieving hot parts from burn tables.
* Feeding sheets into a press.
Model 30 Drill Jig 20140 2 Not for lifting Penetration- 1/8"
* Quick Jig for drill press, punch press, surface grinding, etc.
Model 50 Base Mount 20109 1 Not for lifting Penetration- 1/8"
* For holding jigs and fixtures to a steel table.
* Has a 1/4" - 20 tapped hole in the center top of the block.
Model 100 (Cub) 20105 4 100# Penetration- 1/8"
* For Handling small sheets 12-24 gauge.
* Feeding sheets into a punch press.
* Stacking steel.
* Light fabrication applications.
Model 150 20125-1 6 150# Penetration- 1/16"
* Light fabrication application.
* Handling small sheets 12-24 gauge.
* Feeding sheets into a punch press.
Model 250 20125 6 250# Penetration- 1/16"
* Light and medium fabrication.
* Handling sheets 12-20 gauge.
* Racking and unracking.
* Separating and stacking.
Model 400 20130 8 400# Penetration- 1/8"
* Handling 8 gauge or heavier.
* Plate burning.
* Align sheets for welding.
* Aligning buckled sheets.
Model 400 AH
(44" extension handle)
20131 10 Not for lifting Penetration- 1/8"
* Handling 8 gauge or heavier.
* Handling Manhole Covers.
* Handling and Guiding Trench Plates.
Model 600 20115 10 600# Penetration- 1/8"
* Handling 8 gauge or heavier.
* Plate burning.
* Aligning sheets.
* Pulling buckled sheets.
* Stacking and unstacking.
Model 600 AH
(44" extension handle)
20115-1 14 Not for lifting Penetration- 1/8"
* Handling 8 gauge or heavier.
* Handling Manhole Covers.
* Handling and Guiding Trench Plates.
Model 600 CA 20171 12 600# Penetration- 1/8"
* Handling 8 gauge or heavier.
* Handling Dies, Jigs, Steel Plate, and Machine Fixtures.
* Use on Spreader Bar.
* Shipboard or Shipyard.
* Emergency Tie Down.
* Float Scaffold Typing.
 
Magnetic Angles Part No. Tool Weight. Max. Lift Penetration and Best Uses
Model B-40 (Inside Angle) 20107 3 Not for lifting * To hold plate or sheet steel at right angles, without losing position for welding.
* Magnetic Angles eliminates the use of vises and additional manpower.
Model B-41 (Outside Angle) 20151-1 4 Not for lifting * To hold plate or sheet steel at right angles, without losing position for welding.
* Magnetic Angles eliminates the use of vises and additional manpower.
Model B-80 (Inside Angle) 20135 5 Not for lifting * To hold plate or sheet steel at right angles, without losing position for welding.
* Magnetic Angles eliminates the use of vises and additional manpower.
Model B-81 (Outside Angle) 20150-1 5 Not for lifting * To hold plate or sheet steel at right angles, without losing position for welding.
* Magnetic Angles eliminates the use of vises and additional manpower.
Adjustable Angles       Adjustable Angles have a built-in Protractor.
Model B-40 A (Adjustable Angle) 20151 4 Not for lifting * To hold plate or sheet steel at 45 to 90 degree angles for positioning or welding.
Model B-80 A (Adjustable Angle) 20150 5 Not for lifting * To hold plate or sheet steel at 45 to 90 degree angles for positioning or welding.
 
Magnetic Fishing Tools       * For Drillers of blast holes, water wells, explorations, etc.
* The Magnetic Field is directed out of the bottom of the tool.
* No Magnetism on the sides, thus it will not adhere to casings.
* Capacity depends on the surface area of contact with the item being fished.
* An assured capacity is not feasible except on a flat, clean surface.
3 1/2" Fishing Tool 20153 9 150# For 4" Casings
4 1/2" Fishing Tool 20154 14 350# For 5" Casings
5 1/2" Fishing Tool 20155 20 600# For 6" Casings
6 1/2" Fishing Tool 20156 26 800# For 7" Casings
 
Bar Type Magnetics       A Thousand and One Uses
Has a standard 1/4" hole spaced 3/4" from one end for hanging or mounting.
Magnetic Bar: 5/8" X 1 1/4" X 3" - 48" in length 20110 Per inch   * Collecting Metal Particles out of Tanks, ie: Oil, Cooling, etc.
* Collecting Steel Cuttings around Drill Presses, Milling Machines, Grinders, Duct Collectors, etc.
* Magnetic Tool Rack.